水转印生产流程
Water transfer process
水转印工艺具体可分为七步来操作:
Water transfer process can be divided into seven steps to operate:
1.放覆薄膜:将预印水转印膜置于水上。
Film: laying the preprinted film on water.
2.溶解:采用特殊溶剂使薄膜上的图案活化成油墨状态。
Activating: Spraying activator on the top of the film to activate the ink.
3.披覆:利用水压将图案转印于被印物体上。
Transferring: transfer the pattern to the printed object by water pressure.
4.水洗:将被印工件上残留的杂质用水冲洗干净。
Cleaning: rinse the base film off from the printed workpiece with water.
5.干燥:将被印工件烘干。
Drying: the printed workpiece will be dried.
6.喷面漆:喷上PU透明光油保护被印工件表面。
Top coating: spray PU transparent varnish to protect the surface of the printed workpiece from scratch.
7.再干燥:将喷完面漆的物体表面进行干燥。
Re-drying: dry the surface of the object after top coating.
评论信息